3D Metrology
Structured Light vs Laser Triangulation vs Contact Measurement
Three ways to measure small 3D features, and which suits which job.
All three produce height and dimensional data. They differ in whether they touch the part, how much they measure at once, and what kinds of surface they handle.
| Criterion | Structured light | Laser triangulation | Contact (CMM, stylus) |
|---|---|---|---|
| Principle | Projected pattern, area camera, phase analysis | Projected laser line or spot, scanned across the part | Probe touches the surface point by point |
| Contact with the part | None | None | Yes |
| Data per acquisition | Whole field of view | One line or point | One point |
| Speed over an area | Fast | Depends on scan speed | Slow |
| Soft or wet materials (paste, adhesive) | Suitable | Suitable | Not suitable |
| Height resolution on small features | Micron or sub-micron | Micron level; affected by speckle | Very high on rigid parts |
| Color image with the height data | Available with white light | No | No |
| Large rigid parts and deep features | Limited by field of view and depth | Good with scanning | Best suited |
| Main limitations | Shadows and reflections on shiny surfaces | Shadows, speckle, scan mechanics | Slow; can deform or damage delicate parts |
Phase-shift moiré methods are a form of structured light and share its characteristics.
Which to Choose
Structured light
Small features measured over an area at speed: solder paste, adhesive, BGAs, small components and surface profiles.
Laser triangulation
Profiles along a line, moving parts on a conveyor, or as a fast focus and height reference.
Contact measurement
Rigid parts, large dimensions and deep internal features, where cycle time is not critical.
Want a Recommendation for Your Line?
Tell us about your product and volumes and we will suggest the right class of system.