Solder Paste Inspection
3D SPI vs 2D SPI
What each method measures, which defects it catches and when the third dimension is worth it.
2D paste inspection checks where the paste is. 3D inspection measures how much there is. Because paste volume is what forms the solder joint, the difference decides which defects are caught before reflow.
| Criterion | 2D SPI | 3D SPI |
|---|---|---|
| Area and position | Measured | Measured |
| Height | Not measured | Measured |
| Volume | Estimated from area and stencil thickness | Measured from the 3D profile |
| Insufficient paste with full area coverage | Missed | Detected |
| Shape defects (peaks, scooping, slump) | Missed | Detected |
| Bridging | Detected by contrast | Detected by height |
| Early warning of stencil clogging | Limited | Yes, from height and volume trends |
| Sensitivity to pad and mask color | Higher | Lower |
| Typical form | Camera built into the printer | Benchtop or fully automatic system |
| Investment | Lower | Higher |
Which to Choose
2D SPI
Large-pitch boards with wide process windows, or as a gross-error check inside the printer.
3D SPI
Fine-pitch, small passives, BGAs and QFNs, high-reliability products, or any line where paste data will be used for process control.
Want a Recommendation for Your Line?
Tell us about your product and volumes and we will suggest the right class of system.